стр.9 M ENGINE ELECTRICAL 1E1 - 9 Functions Firing order : 1- 5- 3- 6- 2- 4 - - - - -

M ENGINE ELECTRICAL 1E1 - 9 Functions Firing order : 1- 5- 3- 6- 2- 4 - - - - -

/library/BOOKS/CAR/SsangYong/Korando/KorandoA1E1.pdf\nM ENGINE ELECTRICAL 1E1 - 9
Functions
Firing order : 1- 5- 3- 6- 2- 4
- - - - -
The ignition cables are located on the cylinder head
cover. Each ignition coil provides the high voltage to
two spark plugs simultaneously.
- T1/1 : cylinder and 5
- T1/2 : cylinder and 4
- T1/3 : cylinder and 6
The secondary output voltage (5a) is supplied to the
No.2 cylinder spark plug through the spark plug con-
nector. The secondary output voltage (5b) is supplied
to the No.5 cylinder spark plug through the ignition
cable. The guide pin (W) acts as a ground while the
ignition cable is operated.
Removal & Installation Procedure
Disconnect the negative battery cable (1).
Remove the ignition cable connector from the ignition
cable.
Disconnect the secondary spark plug connectors
from the each spark plugs and remove the ignition
cable bolt and ignition cable.
Installation Notice
Tightening Torque - NSm ( - lb-in)
D Make sure that the ignition cables are correctly
routed.
D Exactly install the ignition cable guide pin into the
vehicle to be grounded.
Installation should follow the removal procedure in
the reverse order.
DAEWOO MY