стр.14 B- MANUAL TRANSMISSION MAINTENANCE AND REPAIR ON-VEHICLE SERVICE SEMI-REMOTE KIT Removal Procedure

B- MANUAL TRANSMISSION MAINTENANCE AND REPAIR ON-VEHICLE SERVICE SEMI-REMOTE KIT Removal Procedure

/library/BOOKS/CAR/SsangYong/Korando/KorandoB5B0.pdf\n5B- MANUAL TRANSMISSION
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
SEMI-REMOTE KIT
Removal Procedure
Remove the control housing arm insulator from the
semi-remote kit.
YAD5B
Remove two snap rings and two screws using the
snap ring plier.
Notice: Do not reuse the damaged snap ring.
YAD5B
Disconnect the shift rod pin using the punch.
YAD5B
SSANGYONG MY
MANUAL TRANSMISSION 5B-15
Remove the shift rod link from the semi-remote
kit.
Remove four metal bushing from the shift rod.
YAD5B
Push down the socket lining’s wing from the
control housing arm and disconnect the socket
lining and shift lever from the semi-remote kit.
YAD5B
Remove the control housing arm by rotating the
clip pin.
YAD5B
Remove the retainer-ring from the U-joint assembly
using the snap ring plier.
YAD5B
SSANGYONG MY
5B- MANUAL TRANSMISSION
Remove the pin from the U-joint assembly using
the punch.
Remove the U-joint assembly from the cover
assembly.
YAD5B
Remove the shift rail from the cover assembly
using the punch.
Pull out the shift rail from the cover assembly.
Inspect and clean all of the disassembled parts
and replace as needed.
YAD5B
Installation Procedure
Insert the shift rail to the cover.
YAD5B
Pull the shift rail to the offset lever using the punch
and assemble them.
YAD5B
SSANGYONG MY
MANUAL TRANSMISSION 5B-17
Insert the rail to U-joint assembly and assemble
the retainer ring using the snap ring plier.
YAD5B
Push down the shift lever and the lining shift socket
from the control housing arm.
YAD5B
Insert the clip pin to fix the cover assembly and
the control housing arm.
YAD5B
Insert the metal bushing to the shift rod.
YAD5B
SSANGYONG MY