ñòð.6 SCAN- 4. If the trouble has been change to “H (History trouble

SCAN- 4. If the trouble has been change to “H (History trouble

/library/BOOKS/CAR/SsangYong/Kyron/Kyron_1_Engine_011_03_001.pdf\n SCAN-
4. If the trouble has been change to “H (History trouble
code)” code, press “ ” key to go back to “FUNCTION
SELECTION” screen. In this screen, select “4] TROUBLE
CODE CLEAR” and press “ ”.
5. The “TROUBLE CODE CLEAR” screen is displayed.
If you press “ ”, only the history trouble codes
will be cleared.
NOTE
• Current trouble codes will not be cleared.
• Check the trouble codes after clearing the trouble
codes.
DIAGNOSIS CHANGED BY
KYRON SM -. EFFECTIVE DATE
AFFECTED VIN
SCAN-
ECU Identification
SCAN
Preceding Work: Perform the “Entering Diagnosis
Procedures”
1. Select “5] ECU IDENTIFICATION” and press “ ”
in “FUNCTION SELECTION” screen.
TCCU
CLUTCH
BRAKE
2. The “ECU IDENTIFICATION” screen that shows the
A/BAG
VIN, ECU software number, ECU software version
and programming date is displayed.
3. If you replaced the ECU, press “ ” to input the A/CON
S / R O O F R/SENSOR R K - S T I C S
vehicle identification number.
CHANGED BY DIAGNOSIS
EFFECTIVE DATE KYRON SM -.09
AFFECTED VIN
SCAN-
Injector (C2I) Corrections
Preceding Work: Perform the “Entering Diagnosis
Procedures”
NOTICE
• If the injector/ECU has been replaced or the in-
jector system defective is suspected, go to C2I
Coding item and check the injector and coded
injector C2I value.
1. Select “6] INJECTOR (C2I) CORRECTIONS” and
press “ ” in “FUNCTION SELECTION” screen.
2. The “INJECTOR (C2I) CORRECTIONS” screen that
shows current C2I coding values of #1 to #5 injector
is displayed.
3. If you replaced the ECU, enter the C2I value of the
relevant injector.
NOTE
• The C2I value of replacing injector is recorded
in the label.
• C2I coding number: digits (ex, B1 B9 D B
C E 4F)
DIAGNOSIS CHANGED BY
KYRON SM -. EFFECTIVE DATE
AFFECTED VIN
SCAN-
) If you enter the invalid C2I value of the relevant
SCAN
injector, the message as shown in figure appears
with alarm sound.
NOTE
• If you want to go back to previous screen, press
“ ” key. You can see the previous C2I value.
) If you enter the valid C2I value of the relevant
injector, the message as shown in figure appears
with alarm sound.
TCCU
CLUTCH
BRAKE
A/BAG
A/CON
S / R O O F R/SENSOR R K - S T I C S
CHANGED BY DIAGNOSIS
EFFECTIVE DATE KYRON SM -.09
AFFECTED VIN