ñòð.5 Outside Rearview Mirror (OSRVM) Mirror Position Control STICS

Outside Rearview Mirror (OSRVM) Mirror Position Control STICS

/library/BOOKS/CAR/SsangYong/Kyron/Kyron_2_Chasis_014_01_005.pdf\n
Outside Rearview Mirror (OSRVM)
Mirror Position Control
STICS
1. The position sensor senses the changes of motors in the mirrors.
2. The mirror position is stored by the memory order of position switch.
3. The mirror position is recalled by the recall order of position switch.
4. The manual adjustment of mirror positions takes priority over the memory and recall orders.
IMMO
Motor Drive Control
SPWM
1. Driving sequence
Horizontal Vertical
CLUSTER
2. Control during memory recall Field of vision:
Specifications of the field of vision • The control range of mirror that is not
) Horizontal direction: 1.5 ~ 3.7 V limited mechanically.
• The control range of that doesn’t affect
) Vertical direction: 1.5 ~ 3.7 V
the sensor characteristics
3. LOCK detection
Timer monitors the motor driving time to detect LOCK condition.
) Monitoring the memory recall time
If the memory recall operation cannot be finished within seconds after activating it, the system stop the
motor output and terminate the control.
WIPER
Error Detection
R / SENSOR
Even though the motor runs, if the drive input change (for seconds) from the position sensor doesn’t change, it is
determined that the harness circuit is open or the motor/sensor failure occurred.
When an error is detected, any memory set or recall operations are prohibited, but the manual operation is possible.
When the sensor input changes by a manual operation, this error is cleared.
LAMP
Specification
1. Rated voltage: DC V
S / ROOF
2. Operating voltage: DC ~ V
3. Current consumption: Max. mA (not including the load)
4. Operating temperature range: -30°C ~ °C
5. Reserve temperature range: -40°C ~ °C
S E AT
A / CRUISE
CHANGED BY SEAT POSITION WITH MEMORY
EFFECTIVE DATE KYRON SM -.09
AFFECTED VIN