стр.4 C-4 FRONT SUSPENSION MAINTENANCE AND REPAIR ON-VEHICLE SERVICE FRONT STABILIZER BAR

C-4 FRONT SUSPENSION MAINTENANCE AND REPAIR ON-VEHICLE SERVICE FRONT STABILIZER BAR

/library/BOOKS/CAR/SsangYong/Musso/MussoB2C0.pdf\n2C-4 FRONT SUSPENSION
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
FRONT STABILIZER BAR
Front Stabilizer Bar Bushing
Bolt - Nm Center Washer
Fixing Cap Lower Arm
Bushing Bushing
Nut. - Nm Outer Washer
Stabilizer Bar Link Assembly Nut. - Nm
Outer Washer
FRONT SUSPENSION 2C-5
Removal & Installation Procedure
1. Remove the connecting nuts (1) from stabilizer bar link.
Installation Notice
Tightening Torque - Nm
2. Remove the connecting nuts (2) of the stabilizer bar and
link and then remove the link.
Installation Notice
Tightening Torque - Nm
3. Remove the stabilizer bar fixing cap bolts (arrow) and
remove the stabilizer bar.
Tightening Torque - Nm
4. Installation should follow the removal precedure in the
reverse order.
Notice
The distance between the end of the nut and the end of the
link should be in - mm at the connection of the stabilizer
bar link and lower arm.
2C-6 FRONT SUSPENSION
TORSION BAR
Nut Torsion Bar
Torque Arm Dust Cover
Washer Height Control Arm Assembly
Bolt M : - Nm Height Control Bolt End Piece
M : - Nm Height Control Bolt
Torsion Bar End Seat Height Control Seat
Dust Cover
FRONT SUSPENSION 2C-7
Removal & Installation Procedure
1. Remove the fixing nuts and bolts of the shock absorber
and lower arm connection.
Installation Notice
Tightening Torque - Nm
2. Remove the connecting nuts of the stabilizer bar link to the
lower arm.
Installation Notice
Tightening Torque - Nm
3. Turn the height control bolt until the distance between the
end of the height control bolt end piece and the bolt end
becomes 0-5 mm.
Installation Notice
Install the torsion bar spring and adjust the distance between
the end of the height control bolt and piece end the bolt
end to be - mm. Adjust the vehicle height.
4. Remove the torque arm fixing nuts and bolts and then
withdraw the torsion bar spring.
Installation Notice
M - Nm
Tightening Torque
M - Nm
5. Installation should follow the removal precedure in the
reverse order.
6. Check and adjust the wheel alignment.